CONTROL VALVES
Series E Globe Valves
Series EW Globe Valves
Series D Globe, DA Angle Valves
Series H1500 LB.
Series HPX and Series HPAX
Series V100
Series 128PQC
Valve Trim
ESD
ACTUATORS
CONTROLLERS
REGULATORS
POSITIONERS
670 MANUAL LOADING STN

7970 PRESSURE SENSOR

2000 PRESSURE PILOT

CENTRIFUGES
CHEMICAL PUMPS
THERMOMETERS
DEW POINT TESTERS
GAUGES
NORRISEAL CONTROLS
OTHER

CONTROL VALVES - Series V100 Ball Valve

Available in 2 thru 12 inch sizes

The CVS V100 Ball valve design utilizes a standard ball with a triangular shaped wedge formed in it.

Excellent Flow Control:

This design allows for both throttling control and on/off service used in conjunction with a variety of actuators.

The CVS V100 valve design closes against one of several available ball seals with a shearing action. The CVS V100 is a flangeless design and allows the valve body to fit between two exiting flanges. The flow characteristic is modified equal percent, with normal (forward) flow into the convex side of the Ball.

Bi-directional flow is into either side of the V-Ball. TCM ball seal, metal ball seal and flow-ring construction can be used in Bi-directional flow.

Typical actuators used are the pneumatic spring and diaphragm rotary actuator (CVS1051) and the pneumatic piston rotary actuator (CVS1061). Mounting of these actuators can be on the right-hand or left-hand side viewed from the forward flow inlet.

Valve bodies are available in LCC, WCB and 316sst material.

CVS Controls manufactures Control Valves and associated instrumentation products to specification that facilitate the direct replacement with FISHER* process control equipment.

* FISHER is a registered trademark of Fisher Controls International Inc. Fisher Controls International Inc. is not affiliated with CVS Controls Ltd. in any manner. Fisher Controls International Inc. has not reviewed, sanctioned or endorsed any products manufactured, reconditioned, sold or marketed by CVS Controls Ltd.